Posts

Showing posts from November, 2026

Watch That Sound: Your Own Chladni Plate

Image
What if you could see sound? A Chladni plate uses a speaker and small particles, like sand, to give you a visual representation of sound, and [CrazyScience] shows you how to make one. The plate dates back to 1787, created by the eponymous physicist. Of course, back then, there were no speakers, so the original plate was metal with a violin bow raked across the edges. The modern version uses an ESP32, a speaker, and salt. The patterns depend on the resonance points of the plate. The device has a rotary encoder to tune different frequencies. Check it out in the video below. There’s also an OLED display to show the frequency and patterns. There is also a 3D-printed enclosure. The patterns, of course, depend on standing waves. We aren’t sure that there’s any practical value for it, but we like the way it looks. This isn’t the first time we’ve talked about Chladni . Visualizing things before the CRT was interesting, to say the least. from Blog – Hackad...

Upgrade Your CoCo The Modern Way

Image
The Radio Shack TRS-80 Colour Computer may never have achieved the sales volume of its competitors from Commodore or Apple, but it offered a surprisingly capable set of hardware. There were three versions, with the final one being a significant upgrade in many ways. There was no upgrade path for owners of version 1 and 2 machines to have a version 3 back in the day, but now thanks to [Felipe Antoniosi] such an upgrade is possible. How? With a Tang Nano 20K FPGA board , of course! The CoCo 3 had a paged memory system for expansion up to 512k, as well as a significantly more capable graphics chip which while compatible with the original Motorola part offered enhanced graphics. The upgrade emulates these, and connects to the CoCo via a set of daughter boards that connect to where the various motherboard chips sat. it offers an HDMI output as well as analog video and enhanced sound capability, bringing the machine firmly into the 21st century. As mods go to classic hardware, this is quit...

Baochip-1x: A Mostly-Open, 22nm SoC for High Assurance Applications

Image
For most people, just getting any old microcontroller or system on chip (SoC) from our favorite – or cheapest – vendor is more than good enough. But if you’re really into high assurance computing where every transistor has to be accounted for, you got a bit of a problem. This is basically why [Andrew “Bunnie” Huang] pitched in and had the Baochip-1x produced . This SoC’s design is based heavily on the FPGA-based CPU in the Precursor device , which itself is claimed to be a fully verifiable communicator design. Since it does have an MMU, you can run any software on it that supports the RV32IMAC RISC-V instruction set, with a Coder’s Guide available for those who might feel interested in this SoC, along with the SystemVerilog and Verilog-based sources . In addition to the DIY assembly process, you can even get a physical hardware version, including the ‘Dabao’ evaluation board with a very Raspberry Pi Pico-shaped form factor. Insid...

Just Use QWIIC Already

Image
Years ago, I wrote an article describing different I2C-on-a-connector ecosystems , explaining their strengths, weaknesses, and implementation details, as well as piling on a heap of fun stories. Looking back at it, it’s a great reference article, if I do say so myself. In particular, I highlighted QWIIC, which is a Sparkfun-borne standard for putting 3.3 V I2C on a JST-SH (or compatible) 4-pin connector. I’ve since implemented a fair bit of QWIIC, and grew to like it so much more. I’m here to explain to you why you ought to be putting those JST-SH connectors in everything you design that touches I2C, all the cool things they let you do, where to buy a lot of cheap cables at once, and all the references you could need. I will also tell you about my USB pinout for QWIIC, something you should definitely know about. In2ispensable Interconnect There’s myriads of devices that speak I2C, and all of them are incredibly useful. Environmental sensors, GPIO expanders, A...

A LEGO 3D Printer

Image
LEGO building blocks are a great toy, but every so often a hacker decides to take the little bricks outside of the toy room and make them an integral part of a build. [Adam Turaj] took that idea further than most with his Studprint, a 3D printer that’s 92% LEGO . We aren’t just talking LEGO bricks making up part of the frame here, or even the bed — though that’s obviously the case — but [Adam] goes so far that even the motion system is using LEGO leadscrews to drive the axes of this printer. Is it particularly capable? Well, no. He’s not boasting of a remarkable bed size or high speeds here because that’s really not the point. The point is that he made a printer in LEGO and if you don’t see the fun in that, we don’t know what to tell you. The whole project is open source, and includes the CAD files for the handful of non-LEGO bits you’ll need to mount the electronics, steppers and such. With an unheated bed of ABS bricks, you...

It’s Elite, For The Commodore Pet

Image
A few times in the life of someone interested in technology, there comes along something which after seeing it, you know the field is never going to be the same again. For a teenage future Hackaday writer this came in seeing  Elite , on a BBC Micro. Nowadays an open world game is normal, but in the mid-1980s it was mind-blowing. Of course, such a powerful piece of software couldn’t be ported to any old computer, so owners of less capable machines were left envious of their more well-heeled friends. It will be a surprise to Commodore Pet owners then, that over four decades later, [David Given] has ported the game to their platform . It’s not such a leap, as the Pet has the same (albeit slower) 6502 as the BBC Micro, and the game requires the Commodore machine to have 32k of memory. So what you get is Elite , but with the Pet’s block graphics rather than the higher-resolution you’d have seen on the newer machines. He admits it doesn’t play well and that the...

FLOSS Weekly Episode 883: Telnet Broke Us

Image
This week Jonathan chats with Sattyam Jain about Agent Audit Kit and Agent Airlock. We’re in a brave new world, where anyone can use AI to generate an AI agent. But what keeps those builds secure? And what can we do to prevent AI jailbreaking where it matters? Listen to find out! https://github.com/sattyamjjain agent-audit-kit: https://github.com/sattyamjjain/agent-audit-kit agent-airlock: https://github.com/sattyamjjain/agent-airlock Newsletter: https://theproductionagent.substack.com Did you know you can watch the live recording of the show right on our YouTube Channel ? Have someone you’d like us to interview? Let us know, or have the guest contact us! Take a look at the schedule here . Direct Download in DRM-free MP3. If you’d rather read along, here’s the transcript for this week’s episode . Places to follow the FLOSS Weekly Podcast: Spotify RSS Theme music: “Newer Wave” Kevin MacLeod (incompetech.com)...

Modular, 3D Printed Train Whistles For Everyone

Image
If the word “train” didn’t grab your attention, you’re probably not the target audience for this project. If it did, then there is no need to explain why [AeroKoi] has come up with a modular 3″ train whistle, available on Thingiverse and well explained in the video embedded below. It’s a train whistle. Who doesn’t want their own train whistle? The great part of this design– aside from requiring less air than his earlier, larger-diameter iterations –is the modularity. With adjustable bell caps, you can alter the size of the resonant chamber and thus the notes the whistle plays on the fly. That’s the key difference between a train whistle, as used in the steam era, and a train horn as you find on a modern diesel or electric– whistles use a resonant chamber, while a horn uses a diaphragm to create the vibrations we call sound. By using the movable chamber caps to change the resonance, you can go from a Santa Fe 5 chime to...

Print & Place: Add Embedded Electronics While FDM Printing

Image
Although combining electronics and 3D-printed structures is fairly common, this usually entails some level of manual assembly. This contrasts strongly with the Print & Place approach demonstrated by [Oliver Child] et al. in their research article titled Print & Place: Using a 3D printer for Continuous Assembly of Electronic Devices . An accompanying video is also provided which covers all the basics and showing a few ways in which a regular FDM printer can be used without modifications to embed these components. Rather than requiring a custom tool head the thermoplastic is used as a temporary adhesive to pick up parts that are placed in a printed tray elsewhere on the build plate. This parts tray is created parametrically before being printed. Following this an operator has to populate this tray with the requisite parts so that the print head can pick them up when they are needed. This is done during the printing of the actual parts, with regular G-code added to move the he...

Watching the Watchers

Image
Although it used to be a much more rare event, now almost any time at dawn or dusk, provided clear weather, a human observer can walk outside, look up, and spot an artificial satellite passing overhead. This has caused some consternation among astronomers who have another source of pollution to deal with in their data, but has benefited society in other ways such as more reliable internet and better weather predictions. To keep an eye on what exactly is passing overhead, take a look at this tool built by [Armaan] . The browser-based satellite tracker uses simplified perturbations models (SGP4) to model the passes of every satellite that has passed a given location on Earth in the past seven days. The modeling is all done locally within the user’s browser, and can even be self-hosted through a fairly simple method that involves forking the project with a tool called Vercel. Not only does this tool find the satellite passes for that given location, though, but it also automaticall...

Gesture Controls With Only a Camera

Image
Back in 2002, [Takahiro Yonemura] and others built a system that used a single webcam-like device to track a user’s hand and generate inputs for a computer. Given that this was more than 20 years ago, the technological limitations were much greater than they are today. It wasn’t until nearly a decade later that we got something like the Microsoft Kinect, and even now many VR and gesture controls require something more than a simple camera. Although [Takahiro Yonemura]’s original paper (Japanese, Google Translate link ) is now many decades old, he’s recently picked the project back up and used it to develop this game . The original system worked by attempting to automatically identify the user’s fingers and head. The team had focused on user inputs for standard PCs, drawing characters in the air and allowing the software to interpret them and pass them to a computer. In the modern iteration the scope is slimmed down a bit. The system instead detects an ope...

How CRISPR Could Mark Mutated Cancer Cells for Termination

Image
Over the past decades CRISPR, short for “clustered regularly interspaced short palindromic repeats”, has become somewhat of a household name, holding the promise of directly addressing genetic mutations by effectively removing, silencing, or even fixing them. Yet the original purpose of CRISPR is slightly less cute and cuddly: the evolutionary origin of these DNA sequences is that of a core component of the prokaryotic immune system. In most medical applications today we only try to use CRISPR to detect sequences and then apply enzymes such as the well-known Cas9 to cut DNA at specific locations in the process of gene-editing. In a recent study (paywalled, bioRxiv pre-print ) by Jingkun Zheng et al. in Nature such benign enzymes are dropped for Cas12a2, which turns a detection event into the release of a DNA-destroy enzyme as the molecular equivalent of a guided missile. The pitched use case here is the detection of cancer-cell specific mutations in the DNA, following wh...

Determining Location by Listening for Airplanes

Image
Beyond what people deliberately disclose, there’s a surprising amount of information hidden in everyday messages, especially photos and videos. Even when people try to hide the location or time at which something was recorded, small details make these surprisingly difficult to obscure. One of the more well-known techniques correlates mains-frequency hum with power grid frequency variations. In a similar vein, [colsto] recently developed a powerful technique for precisely geolocating videos using the Doppler curves generated by passing aircraft. Since aircraft are often audible for miles in all directions, they’re particularly likely to be inadvertently picked up in a video. The aircraft may not be discernible to the human ear, but the sound it makes can still show up in a spectrogram. To turn this data into a location, the pattern of Doppler curves needs to be correlated to an aircraft’s flight path. This is easy enough using public ADS-B records, which provide a timestamped history...

Cat Feeder Ensures Fed Cats

Image
Automatic cat feeders are a dime a dozen, largely because this is an easy problem to solve. Dry cat food is easy for machines to manipulate, and the electronics needed to accomplish the task to a bare minimum are plentiful and inexpensive. But just doling out food is only easy part of the problem. [Jason] wanted to make sure that his cats actually ate once the food was dispensed so he added a few extra features to this cat feeder . The main addition to this feeder compared to off-the-shelf models is a weight sensor under the bowl. The feeder metes out a certain amount of food, and then a Raspberry Pi Pico W keeps an eye on the weight of the dish. If it goes down, presumably the cat has eaten all of the food. But just to be sure, an ultrasonic sensor was added beside the bowl to ensure something cat-shaped was there at the same time. There was some issue with this sensor blasting out noise in a cat’s audible range at first, but it seems like that problem has since been solved as w...

Etching Press Aims To Impress

Image
There’s an old joke about inviting a girl up to your dorm room to ‘look at your etchings’– but if you’re going to do that, you’d best have some etchings, lest she call your bluff. Even better would be to have prints available, so you might share your hard work with adoring fans. Over on YouTube, [This Designed That] shows building the perfect little etching press   so you need never invite anyone to your room again: you can crank out enough prints on this bad boy to hand out your etchings on a street corner! Crank is the right word, because it’s hand-cranked, with the rollers chain-driven off a separate driveshaft. It works like, well, a roller press: two steel rollers squeeze a plattern holding your inked etching and a of paper together to put an image onto. His choice of an off-cut of steel pipe to use as the top roller is inspired, even if he did have to turn it down quite a bit to get an even radius and smooth surface finish. The whole thin...

Toddler Phone Calls Family and No One Else

Image
The great thing about the modern world is how connected we are. It’s also the worst thing about the modern world, to be honest. [Allan Binder] wanted to give his toddler the very best of that, and escape the worst, with a specially-designed telephone to call Grandma with– and not get scam calls in turn. We’re not going to say his build guide is so thorough a toddler could follow it, but it’s not too far off. The device is very simple: a commercial ‘retro-style’ handset pairs with an ESP32-S3 over USB. Said ESP32, aside from acting as a USB host, runs a minimal Session Initiation Protocol (SIP) client, which connects via WiFi to a VoIP account the parent has set up. In this case, [Allan] is using Twilio, but there are other internet telephony providers one could use if a Twilio employee once ran over your dog or something. There are no inbound calls in this setup, so little Timmy isn’t going  to be bothered needlessly about import fees on no...

Detecting an Eight Magnetic Pole State using Chiral Phonons

Image
The idea that magnetism doesn’t necessarily always have a dipolar configuration is not a new one, but it’s not an easy theory to find evidence for. Most recently a team of scientists at the University of Toronto used a new method involving vibrational energy in the form of phonons to find evidence for an octupolar magnetic order . In the associated paper in  Physical Review Letters (paywalled, arXiv version ) by [Ruairidh Sutcliffe] et al. we can find more details on this method and what their findings may mean for various fields. Naturally, this is a quantum-level phenomenon that requires Raman spectroscopy to be detectable via said phonons. The materials investigated here are also somewhat exotic, ranging from actinides like NpO 2 to transition metal oxides like Sr 2 MgReO 6 , while having on common strong spin-orbit coupling. Where the phonons come into play is that they can be used to indirectly measure crystal lattice distortions due to the pseudo-angular momentum a...

NEMESIS Gives You Control Over Your Hyundai Head Unit

Image
Whether it’s to make more money or because of licensing disagreements, car companies often restrict the abilities of the infotainment units in their vehicles. They can do so much more, and a group of hackers is setting the Gen5W systems from Hyundai free with NEMESIS . Many Hyundai and Kia vehicles from 2015 to 2019 use the Gen5W system, but there are some exceptions to the exploit like the Hyundai Elantra, Kia Forte, and Hyundai Ioniq 6, along with Canadian vehicles using the system. The most interesting feature for most users will likely be the ability to use Android Auto or Apple CarPlay wirelessly as well as bringing turn-by-turn navigation cues from those systems to the driver cluster and heads up display like you get with the built-in, but not so great, OEM navigation system. Using a flaw in the over the air (OTA) update system, the developer says “the version must have S5W_M in it (General Settings > SW Info). S5W_L is not supported.” The head unit must als...

Flying an RC Airplane with Twin Airblower EDFs

Image
Shortly after [RCMakerLab] posted his question on potentially equipping an RC airplane with the electronic ducted fans (EDFs) from those airblower devices – are sold mostly as a replacement for canned air – the comment sections pretty much exploded with comments that he should just have strapped them onto an RC airplane and see for himself. In a new video this is exactly what is done , creating a somewhat A-10 Warthog-esque RC plane with its twin EDF turbines. After we first covered this journey, the next question that got answered in the subsequent video was whether replacing the default electronic speed control (ESC) would make sense, mostly to lighten the load and optimize it for use with a typical RC avionics controller.  This turned out to be the case, and thus it’s time for a test flight. The aircraft created from largely styrofoam board seems to be largely designed for stability, with its large wings and the very A-10-like placement of the turbines right abov...