Inside the Heathkit Factory

-

If you are a certain age, you doubtlessly remember Heathkit. They produced a wide array of electronic kits that were models of completeness and clear instructions. They started with surplus war parts in 1947 and wound up a major player in ham radio and early personal computers. But they made so many other things like TVs, radio control planes, and test equipment. All of it was made for you to build yourself. [Unseen History] released a video with the story of Heathkit from the start to the finish.

The company started out building kit airplanes, but after the war, they built a kit for an oscilloscope using military surplus. The less than $40 scope was still pricey in 1947 when a pound of bacon sold for 64 cents. But a “real” oscilloscope at the time would cost at least $400. The rest is history.

The Heathkit manuals were made simple enough that anyone could build a kit. But they also contained enough detail that you could truly understand what you built. Heathkit gear is still prized today.

Heathkit lost the kit business when Zenith bought the company, partly due to inattention and partly because fewer people cared about electronic kits. This was hastened by a drop in interest and to the availability of inexpensive electronics that you didn’t have to build. The company limped along with educational materials and home automation. By 2012, it was done. At its peak, the company employed over 1,800 people, and by the end, there were six people who lost their jobs.

We’ve covered Heathkit’s history before. Heathkit appears to have rebooted in some form, but we don’t know much about it.



from Blog – Hackaday https://ift.tt/H1coqTi

Comments

Post a Comment

Popular posts from this blog

Modern Radio Receiver Architecture: From Regenerative to Direct Conversion

-
Image
Modern radio receivers have a distinct advantage over the common early designs which I covered in my previous article . Most of the receivers you will have worked with over the past couple decades are designs by Edwin Armstrong ; regenerative, superregenerative, or most commonly superheterodyne. These are distinguished by a few fascinating key traits that bring both benefits and drawbacks. Today let’s dive into Mr. Armstrong’s receivers. I’ll also talk about DC receivers which, despite the name, are not made to listen to batteries. These are receivers you are much more likely to encounter in modern equipment. Regenerative and Superregenerative The regenerative receiver is all about doing more with less. You still see some of these in simple applications like RF remote controls. The idea derives from how an oscillator works. In a simple way of thinking, an oscillator is an amplifier with enough positive feedback that any tiny signal at the right frequency will amplify and then, throu...
Get this one»

Custom Macro Keyboard Looks Good in Wood

-
Image
There’s more than one way to make a mechanical macro pad, and this wooden wonder represents one of our favorites . [Tauno Erik] had an old rubber dome rectangle keyboard lying around that still worked, but the poor thing was missing some of its caps. After salvaging the controller, [Tauno Erik] got to work on the tedious task of figuring out the mapping of the matrix, which was made easier with a Python script. Almost every component of this beauty is wood, including the mounting plate and those thicc and lovely keycaps — their top layer is solid oak, and the bottom bit is birch plywood. In order to interface the ‘caps with the switches, [Tauno Erik] designed and printed connector pieces that sit inside the extra large keycaps and accept the stems of the key switches. Speaking of switches, we’re not sure if [Tauno Erik] ended up using Cherry green switches, browns, or a mix of both (that would be interesting), but each one is mounted on a custom PCB along with a diode and a pull-up ...
Get this one»

Build this Cyberdeck in a Cave with a Box of Scraps

-
Image
Desktop 3D printing has been a big enabler for the cyberdeck community, as it’s allowed individuals to create unique frames and enclosures which would have been far more difficult and time consuming to produce using traditional methods. But what if you don’t have access to a well-stocked workspace, and need to do your building with the bare minimum of equipment? In that case, [ALX] recently put together a minimalistic design that can be assembled with off-the-shelf components and basic tools. It’s the ideal cyberdeck for the neophyte, as all the parts are widely available and relatively inexpensive. While it might not be a customized as something with a fully 3D printed frame, we think it nails the look and utility that are the hallmarks of a proper deck. The key to this build is the SmartiPi Touch case, which puts the Raspberry Pi and touch screen on a hinged panel. These hinges happen to be compatible with GoPro-style mounts, so with a few extension pieces, the panel can be lifted...
Get this one»