Chugging Along: A Steam-Powered Sawmill Still Makes Its Mark

-

[Rural Heritage TV] has video of a private tour of a working, two-story, steam-powered sawmill at Lake Itasca, Minnesota. This is believed to be one of the only working steam-powered band-sawmills in the country with a shotgun (or reciprocating) feed carriage. The carriage moves back and forth with a log while a monstrous 44-foot long bandsaw cuts pieces off on every stroke. There’s even a log turning mechanism, because if there’s one thing that never changes, it’s that time is money.

There is great footage of the whole thing in action, and also a serious tour of just how much work was needed to keep such a tool running. For example, in its heyday a machine like this would be swapping bands out for maintenance and sharpening every few hours.

Viewers unfamiliar with such machinery may notice the lack of rims or guard rails on the bandsaw and other belts and pulleys. How do bands stay centered on spinning wheels without falling off? The crowned pulley was the steam era’s solution, providing a means for belts to self-center without any need for rims or other additions.

This tour of the sawmill is a nifty peek at a technology that, at one point, ruled the roost. Watch it in action in the video, just under the page break. If that leaves you hungry to know more, there’s a second video that goes into added detail about saw sharpening and more.

One last tip: if you’re hungry to know more about the history of the steam engine, The Perfectionists is absolutely a book you should read because it goes into fascinating detail about that, and more.

 

Thanks to [Keith Olson] for bringing this to our attention!



from Blog – Hackaday https://ift.tt/1pCqnSU

Comments

Post a Comment

Popular posts from this blog

Modern Radio Receiver Architecture: From Regenerative to Direct Conversion

-
Image
Modern radio receivers have a distinct advantage over the common early designs which I covered in my previous article . Most of the receivers you will have worked with over the past couple decades are designs by Edwin Armstrong ; regenerative, superregenerative, or most commonly superheterodyne. These are distinguished by a few fascinating key traits that bring both benefits and drawbacks. Today let’s dive into Mr. Armstrong’s receivers. I’ll also talk about DC receivers which, despite the name, are not made to listen to batteries. These are receivers you are much more likely to encounter in modern equipment. Regenerative and Superregenerative The regenerative receiver is all about doing more with less. You still see some of these in simple applications like RF remote controls. The idea derives from how an oscillator works. In a simple way of thinking, an oscillator is an amplifier with enough positive feedback that any tiny signal at the right frequency will amplify and then, throu...
Get this one»

Hackaday Links: May 31, 2020

-
We begin with sad news indeed as we mark the passing of Marcel van Kervinck on Monday. The name might not ring a bell, but his project, the Gigatron TTL computer , certainly will. We did a deep dive on the microprocessor-less computer a while back, and Marcel was a regular at conferences and on the Gigatron forums, supporting users and extending what the computer can do. He was pretty candid about his health issues, and I’ll add that when I approached him a few weeks ago out of the blue about perhaps doing a Hack Chat about Gigatron, he was brutally honest about how little time he had left and that he wouldn’t make it that long. I was blown away by the grace and courage he displayed. His co-conspirator Walter Belger will carry on the Gigatron mission, including joining us for a Hack Chat on June 24. In the meantime, this might be a great time to pick up a Gigatron kit before they’re all sold out and get busy soldering all those delicious through-hole TTL chips. May of 2020 is the mo...
Get this one»

Homebrew 68K Micro-ATX Computer Runs Its Own OS

-
Image
We’re no stranger to home built Motorola 68000 computers here at Hackaday, but more often than not, they tend to be an experiment in retro minimalism. The venerable processor is usually joined by only a handful of components, and there’s an excellent chance they’ll have taken up residence on a piece of perfboard. Then [NotArtyom] sent in his Blitz , and launched the bar into the stratosphere. Make no mistake, the Blitz isn’t just some simple demo of classic chips. The open hardware motherboard has onboard floppy, IDE, and PS/2 interfaces, with a trio of 8-bit ISA expansion slots for good measure. The  Motorola 68030 CPU is humming along at 50 MHz, with 4 MB of RAM and 512 KB of ROM along for the ride. Designed to fit the Micro-ATX motherboard standard, you can even mount the Blitz in a contemporary PC case and run it on a standard ATX power supply. An earlier prototype of the Blitz motherboard. As if the hardware wasn’t impressive enough, [NotArtyom] went ahead and created hi...
Get this one»