Polish Railways Fall Victim To Cheap Radio Attack

-

Poland’s railways have recently come under a form of electronic attack, as reported by Wired. The attack has widely been called a “cyber-attack” in the mainstream media, but the incident was altogether a more simple affair pursued via good old analog radio.

The attacks were simple in nature. As outlined in an EU technical document, Poland’s railways use a RADIOSTOP system based on analog radio signals at around 150 MHz. Transmitting a basic tone sequence will trigger any duly equipped trains receiving the signal to engage emergency braking. It’s implemented as part of the PKP radio system on the Polish railway network.

The attacks brought approximately 20 trains to a standstill, according to the BBC, with services restored within hours. There was no major safety risk in the event, something made clear in a statement from Polish rail authorities. Regardless, the attacks frustrated logistics across the rail network.

It’s believed the perpetrators of the attack were supporters of the Russian war effort, as the stop signals were also joined by broadcasts of the Russian national anthem and a speech from Russian President Vladimir Putin. The attacks have some significance to the invasion of Ukraine, as Poland has been a hub for crucial weapons deliveries supporting the defence of Ukraine.

The concern is that any unsophisticated individual could achieve the same results with cheap off-the-shelf equipment under $100. The emergency stop feature is completely insecure, which has been public knowledge for some time. Unlike an emergency brake on a passenger train, which requires proximity to actuate, the RADIOSTOP feature can be triggered at will from any remote location within transmission range. That makes catching perpetrators more difficult.

Poland’s railways will receive an upgrade to more secure cellular technology by 2025, with the 150 MHz system retained only for shunting duties and other edge cases.  Interestingly, it will use GSM-R for connectivity, which is a big deal in Europe.

Until then, the vulnerability will remain as long as the 150MHz RADIOSTOP feature is enabled. Polish radio authorities may have their work cut out chasing down illegal transmitters in the meantime to prevent repeat attacks. It’s not the only way to bring a railway to a stop, but it’s unfortunately an easy and effective one.

[Thanks to Charles for the tip!]



from Blog – Hackaday https://ift.tt/5sSt7ka

Comments

Post a Comment

Popular posts from this blog

Modern Radio Receiver Architecture: From Regenerative to Direct Conversion

-
Image
Modern radio receivers have a distinct advantage over the common early designs which I covered in my previous article . Most of the receivers you will have worked with over the past couple decades are designs by Edwin Armstrong ; regenerative, superregenerative, or most commonly superheterodyne. These are distinguished by a few fascinating key traits that bring both benefits and drawbacks. Today let’s dive into Mr. Armstrong’s receivers. I’ll also talk about DC receivers which, despite the name, are not made to listen to batteries. These are receivers you are much more likely to encounter in modern equipment. Regenerative and Superregenerative The regenerative receiver is all about doing more with less. You still see some of these in simple applications like RF remote controls. The idea derives from how an oscillator works. In a simple way of thinking, an oscillator is an amplifier with enough positive feedback that any tiny signal at the right frequency will amplify and then, throu...
Get this one»

Hackaday Links: May 31, 2020

-
We begin with sad news indeed as we mark the passing of Marcel van Kervinck on Monday. The name might not ring a bell, but his project, the Gigatron TTL computer , certainly will. We did a deep dive on the microprocessor-less computer a while back, and Marcel was a regular at conferences and on the Gigatron forums, supporting users and extending what the computer can do. He was pretty candid about his health issues, and I’ll add that when I approached him a few weeks ago out of the blue about perhaps doing a Hack Chat about Gigatron, he was brutally honest about how little time he had left and that he wouldn’t make it that long. I was blown away by the grace and courage he displayed. His co-conspirator Walter Belger will carry on the Gigatron mission, including joining us for a Hack Chat on June 24. In the meantime, this might be a great time to pick up a Gigatron kit before they’re all sold out and get busy soldering all those delicious through-hole TTL chips. May of 2020 is the mo...
Get this one»

Homebrew 68K Micro-ATX Computer Runs Its Own OS

-
Image
We’re no stranger to home built Motorola 68000 computers here at Hackaday, but more often than not, they tend to be an experiment in retro minimalism. The venerable processor is usually joined by only a handful of components, and there’s an excellent chance they’ll have taken up residence on a piece of perfboard. Then [NotArtyom] sent in his Blitz , and launched the bar into the stratosphere. Make no mistake, the Blitz isn’t just some simple demo of classic chips. The open hardware motherboard has onboard floppy, IDE, and PS/2 interfaces, with a trio of 8-bit ISA expansion slots for good measure. The  Motorola 68030 CPU is humming along at 50 MHz, with 4 MB of RAM and 512 KB of ROM along for the ride. Designed to fit the Micro-ATX motherboard standard, you can even mount the Blitz in a contemporary PC case and run it on a standard ATX power supply. An earlier prototype of the Blitz motherboard. As if the hardware wasn’t impressive enough, [NotArtyom] went ahead and created hi...
Get this one»