Bike Camper with Retro Flair

-
A blue work tricycle (single front wheel with platform between two rear wheels) sits on an asphalt path with trees and wildflowers in the background. A boxy, white camper with a front overhanging the bike seat is attached to the platform. It has a yellow stripe and curtains like many campers did in the 1970s. One white male is exiting the door of the camper while his brother is standing to the left of the camper by the bike seat.

As we’re approaching summer here in the Northern Hemisphere, thoughts naturally turn toward road trips. While most people do this in their car, the [Dangie Bros] built a 500 lb bike camper for their own take on the great American Road Trip.

Taking a maximalist approach not seen in most bike campers, this behemoth has a working sink, propane stove, seating area, and an upstairs sleeping area. A small window in the front of the camper opens to let the passenger inside converse with the person pedaling, and a solar panel charges a small battery for lights and a roof fan.

While the camper is very ’70s retro-chic, its lack of assist (other than the passenger getting out to push) meant that on the second day of their road trip they resorted to towing the camper behind a second bike in a pseudo-tandem arrangement. The fold out bed takes some design cues from RVs, but clearly needed more reinforcement since it collapsed partway through the night. With an e-assist and some refinements, this could be comfortable (albeit slow) way to go bike glamping.

If you’d like to try your own hand at a bike camper but do it more aerodynamically and attached to an assisted bike, checkout this teardrop trailer or this bike camper.



from Blog – Hackaday https://ift.tt/tGAZnRv

Comments

Post a Comment

Popular posts from this blog

Modern Radio Receiver Architecture: From Regenerative to Direct Conversion

-
Image
Modern radio receivers have a distinct advantage over the common early designs which I covered in my previous article . Most of the receivers you will have worked with over the past couple decades are designs by Edwin Armstrong ; regenerative, superregenerative, or most commonly superheterodyne. These are distinguished by a few fascinating key traits that bring both benefits and drawbacks. Today let’s dive into Mr. Armstrong’s receivers. I’ll also talk about DC receivers which, despite the name, are not made to listen to batteries. These are receivers you are much more likely to encounter in modern equipment. Regenerative and Superregenerative The regenerative receiver is all about doing more with less. You still see some of these in simple applications like RF remote controls. The idea derives from how an oscillator works. In a simple way of thinking, an oscillator is an amplifier with enough positive feedback that any tiny signal at the right frequency will amplify and then, throu
Get this one»

Hackaday Links: May 31, 2020

-
We begin with sad news indeed as we mark the passing of Marcel van Kervinck on Monday. The name might not ring a bell, but his project, the Gigatron TTL computer , certainly will. We did a deep dive on the microprocessor-less computer a while back, and Marcel was a regular at conferences and on the Gigatron forums, supporting users and extending what the computer can do. He was pretty candid about his health issues, and I’ll add that when I approached him a few weeks ago out of the blue about perhaps doing a Hack Chat about Gigatron, he was brutally honest about how little time he had left and that he wouldn’t make it that long. I was blown away by the grace and courage he displayed. His co-conspirator Walter Belger will carry on the Gigatron mission, including joining us for a Hack Chat on June 24. In the meantime, this might be a great time to pick up a Gigatron kit before they’re all sold out and get busy soldering all those delicious through-hole TTL chips. May of 2020 is the mo
Get this one»

Homebrew 68K Micro-ATX Computer Runs Its Own OS

-
Image
We’re no stranger to home built Motorola 68000 computers here at Hackaday, but more often than not, they tend to be an experiment in retro minimalism. The venerable processor is usually joined by only a handful of components, and there’s an excellent chance they’ll have taken up residence on a piece of perfboard. Then [NotArtyom] sent in his Blitz , and launched the bar into the stratosphere. Make no mistake, the Blitz isn’t just some simple demo of classic chips. The open hardware motherboard has onboard floppy, IDE, and PS/2 interfaces, with a trio of 8-bit ISA expansion slots for good measure. The  Motorola 68030 CPU is humming along at 50 MHz, with 4 MB of RAM and 512 KB of ROM along for the ride. Designed to fit the Micro-ATX motherboard standard, you can even mount the Blitz in a contemporary PC case and run it on a standard ATX power supply. An earlier prototype of the Blitz motherboard. As if the hardware wasn’t impressive enough, [NotArtyom] went ahead and created his ow
Get this one»