How to Move a Full-Sized Church Organ From a House to a Museum

-
A man playing a pipe organ through a MIDI keyboard

As electronics hobbyists we are grateful to our spouses and flatmates who gracefully tolerate all of our weird equipment and chaotic projects in their homes. But it takes a different level of dedication to share one’s home with a pipe organ enthusiast: back in the 1970s, one organist in Bristol went to the effort of installing a full-sized church organ into their house, effectively turning the modest dwelling into one giant musical instrument. Recently however, the house passed on to new owners who, understandably anxious to reclaim some space, listed the whole system on eBay.

A pipe organ installed into an attic
No cash in this attic; just lots of zinc pipes and pneumatic tubing.

Thankfully, the auction was won not by some scrap metal dealer but by [Look Mum No Computer], our favourite expert on odd musical instruments. He drove out all the way from Kent to help disassemble the organ and stuff the dozens of pipes, miles of cable and numerous valves, tubes, latches and switches into his van. Once back home, he faced the daunting task of reassembling the whole lot into something capable of playing music, which he’s currently documenting in a video series.

The organ’s new home is This Museum Is (Not) Obsolete, where it has its own room decorated in a style similar to the house it spent much of its life in. The first step to getting it working was to fire up the blower, which is effectively a powerful electric air pump together with a pressure-regulating mechanism. Once this was working, one row of pipes was added to test the actuation system. This consists of a set of solenoids that simply open or close the air supply to each pipe. [LMNC] still had an Arduino-based organ driver system from an earlier project, which allowed him to connect a MIDI keyboard to the partially-complete instrument and play a few notes on it.

There’s still a lot to be done, but we’re definitely impressed by what [LMNC] has achieved so far and can’t wait to see the organ restored to its former glory. We already knew that you could control pipe organs through MIDI, and we’ve seen much smaller organs built from scratch. Thanks for the tip, [hackbyte]!



from Blog – Hackaday https://ift.tt/U5qhod0

Comments

Post a Comment

Popular posts from this blog

Modern Radio Receiver Architecture: From Regenerative to Direct Conversion

-
Image
Modern radio receivers have a distinct advantage over the common early designs which I covered in my previous article . Most of the receivers you will have worked with over the past couple decades are designs by Edwin Armstrong ; regenerative, superregenerative, or most commonly superheterodyne. These are distinguished by a few fascinating key traits that bring both benefits and drawbacks. Today let’s dive into Mr. Armstrong’s receivers. I’ll also talk about DC receivers which, despite the name, are not made to listen to batteries. These are receivers you are much more likely to encounter in modern equipment. Regenerative and Superregenerative The regenerative receiver is all about doing more with less. You still see some of these in simple applications like RF remote controls. The idea derives from how an oscillator works. In a simple way of thinking, an oscillator is an amplifier with enough positive feedback that any tiny signal at the right frequency will amplify and then, throu...
Get this one»

Hackaday Links: May 31, 2020

-
We begin with sad news indeed as we mark the passing of Marcel van Kervinck on Monday. The name might not ring a bell, but his project, the Gigatron TTL computer , certainly will. We did a deep dive on the microprocessor-less computer a while back, and Marcel was a regular at conferences and on the Gigatron forums, supporting users and extending what the computer can do. He was pretty candid about his health issues, and I’ll add that when I approached him a few weeks ago out of the blue about perhaps doing a Hack Chat about Gigatron, he was brutally honest about how little time he had left and that he wouldn’t make it that long. I was blown away by the grace and courage he displayed. His co-conspirator Walter Belger will carry on the Gigatron mission, including joining us for a Hack Chat on June 24. In the meantime, this might be a great time to pick up a Gigatron kit before they’re all sold out and get busy soldering all those delicious through-hole TTL chips. May of 2020 is the mo...
Get this one»

Homebrew 68K Micro-ATX Computer Runs Its Own OS

-
Image
We’re no stranger to home built Motorola 68000 computers here at Hackaday, but more often than not, they tend to be an experiment in retro minimalism. The venerable processor is usually joined by only a handful of components, and there’s an excellent chance they’ll have taken up residence on a piece of perfboard. Then [NotArtyom] sent in his Blitz , and launched the bar into the stratosphere. Make no mistake, the Blitz isn’t just some simple demo of classic chips. The open hardware motherboard has onboard floppy, IDE, and PS/2 interfaces, with a trio of 8-bit ISA expansion slots for good measure. The  Motorola 68030 CPU is humming along at 50 MHz, with 4 MB of RAM and 512 KB of ROM along for the ride. Designed to fit the Micro-ATX motherboard standard, you can even mount the Blitz in a contemporary PC case and run it on a standard ATX power supply. An earlier prototype of the Blitz motherboard. As if the hardware wasn’t impressive enough, [NotArtyom] went ahead and created hi...
Get this one»